Creosote Removal in Stuart, FL
Heavy and glazed creosote removed so the flue is safe to use again.
- Family owned and run
- Licensed & insured
- Same-day service
- Locally run
Get Your Free Inspection
About thirty seconds
Request received
Thank you. Someone from our family crew will call you to set a time for the free inspection.
Quicker by phone? Call (772) 610-6329
Short answer
Creosote removal clears the heavy or glazed deposits left in a flue after many fires, the kind a brush alone will not take off. Chimney creosote removal uses rotary cutting tools, chemical treatments that turn glaze brittle, or both, followed by a sweep and an inspection of the flue underneath.
Free Inspection, Then 10% Off the Work
Book your creosote removal within 72 hours of the free inspection and 10% comes off the work.
How We Handle This Job
-
Experienced crew
An experienced crew that removes glaze without damaging the flue tiles.
-
A written record of the work we did
A written note of the creosote stage and what was removed.
-
Upfront pricing
The method, the number of visits and the price written down first.
Parts and Materials
- Rotary cutting tools
- Chains and heads sized to the flue to break deposits loose.
- Creosote treatment
- Turns hard glaze brittle so it can be swept out.
Three Kinds of Creosote
Light creosote is flaky and sweeps out easily. The next stage is crusty and tar-like, and needs more aggressive brushing. The last is glazed creosote, a hard, shiny layer that forms when tar is reheated again and again; it is sometimes called stage 3 creosote. Glazed creosote removal is the hardest of the three and the most important, because glaze burns very hot in a chimney fire.
How We Remove Heavy Creosote
Heavy creosote removal starts with rotary tools: flexible rods spinning cutting heads or chains matched to the flue, which break the deposits off without damaging sound tiles. Where glaze is too hard, we apply a creosote treatment over one or more visits that changes it into a brittle residue a sweep can remove.
Creosote cleaning always ends with a full sweep and an inspection, because heavy buildup sometimes hides cracked tiles or damage from a past chimney fire.
Why It Builds Up
Creosote builds fastest with damp wood, smoldering fires, a damper kept half closed and an oversized or cold flue. Burning dry wood hot and briefly, and keeping the flue warm with an insulated liner, slows it down.
Questions We Answer Often
Why is my chimney leaking creosote?
Creosote mixes with water from rain or condensation and runs down the flue as a dark, tar-like liquid. It usually means heavy buildup in the flue plus a missing cap or a cracked crown letting water in. Both problems need fixing: the creosote removed and the water stopped.
Do chimney cleaning logs remove creosote?
Chimney cleaning logs can loosen light creosote slightly, but they do not remove it. The loosened flakes still fall onto the smoke shelf and must be swept out. They are not a substitute for a sweep, and they do nothing for hard, glazed creosote.
What is the black liquid running from my chimney?
Black liquid from a chimney is usually creosote dissolved in water. Rain enters through a missing cap or a cracked crown, picks up the creosote in the flue and runs down into the firebox or out through the masonry. It stains brick and smells strongly of tar.
Is glazed creosote dangerous?
Yes. Glazed creosote is the most flammable form, and a fire in a glazed flue burns extremely hot and can crack tiles or damage the masonry. Stop using the fireplace until the glaze is removed and the flue has been inspected.
Chimney & Fireplace Brands We Work With
Heat & Glo 
Heatilator 
Rutland 
Copperfield Chimney Supply 
Olympia Chimney and Venting 
DuraVent
What Shapes the Price
- Stage of creosote
- Crusty deposits come off faster than glaze.
- Flue length and shape
- Taller flues and bends take more time.
- Number of visits
- Thick glaze may need treatment over more than one visit.
Book Your Free Stuart Inspection
A short form, a quick call back, and a time that suits you.
- Inspection first, estimate in writing
- Upfront pricing, no hidden fees
- Family owned and operated
Request received
Thank you. Someone from our family crew will call you to set a time for the free inspection.
Other Services Worth a Look
Repair It or Go Bigger
WhenCrusty, tar-like deposits
FixRotary removal and a full sweep
CheckTiles under the deposits are sound
WhenHard, shiny glaze
FixChemical treatment, then rotary removal
CheckSigns of a past chimney fire
Signs This Job Is Due
Most creosote brushes out during a normal sweep. Some does not: thick, tar-like layers or a hard, shiny glaze that has baked onto the flue. Our Stuart crew identifies which kind your chimney has, then uses rotary tools and creosote treatments to remove it so the flue can be inspected and used safely again.
- Shiny, tar-like coating inside the flue
- Thick black crust that a brush slides over
- A strong smell of tar from the fireplace
- Black liquid running from the chimney or firebox
Proudly American
Family owned in Stuart, with an experienced crew, upfront pricing and a workmanship warranty on the work we do.
Call Now (772) 610-6329Make the Flue Safe to Use Again
Our free inspection identifies which stage of creosote lines your Stuart flue.