Skip to content
Call Now (772) 610-6329

Gas Fireplace Repair and Service in Stuart, FL

Pilot, valve, ignitor and blower problems found and fixed safely.

  • Family owned and run
  • Licensed & insured
  • Same-day service
  • Locally run

Get Your Free Inspection

About thirty seconds

Quicker by phone? Call (772) 610-6329

Call for a free inspection

(772) 610-6329 Book a Free Inspection

Short answer

Gas fireplace repair starts with the parts that make the flame: the pilot, the thermocouple or thermopile, the gas valve and the ignitor. Our Stuart crew tests each in order, replaces the failed one with a part listed for your fireplace, then checks the burner, glass and vent.

Free Inspection, Then 10% Off the Work

Book your gas fireplace repair within 72 hours of the free inspection and 10% comes off the repair.

(772) 610-6329

What You Can Count On

  • Same-day service

    A fireplace that will not light can often be looked at the same day you call.

  • Upfront pricing

    The failed part and its fitted price are written down before we replace it.

  • Experienced crew

    An experienced crew that tests pilots, valves and ignitors in order, not by guesswork.

On this page
  1. When the Gas Fireplace Is Not Working
  2. Valves, Remotes and Blowers
  3. Annual Gas Fireplace Service
  4. Inserts, Logs and Propane Units
  5. A Gas Fireplace Repair Company You Can Call Back

When the Gas Fireplace Is Not Working

A gas fireplace not working usually comes down to the pilot circuit. In a standing-pilot fireplace, a small flame heats a thermocouple or thermopile, which produces a tiny current that holds the gas valve open. Dirt on the pilot, a weak thermocouple or a failing valve breaks that chain and the fire goes out. Gas fireplace pilot light repair and gas fireplace thermocouple replacement are routine fixes.

Newer fireplaces use an electronic ignitor instead. When the ignitor clicks but nothing lights, gas fireplace ignitor replacement or a module repair is often the fix.

Valves, Remotes and Blowers

Gas fireplace valve replacement is needed when the valve no longer opens or holds steady. We use the valve listed for your model, never a near match. Gas fireplace remote repair covers the handheld remote, the receiver and its batteries, which fail more often than people expect in a humid room.

Fireplace blower replacement and gas fireplace blower repair restore the fan that pushes warm air into the room. A noisy or dead blower is usually a worn motor or a loose connection.

Annual Gas Fireplace Service

An annual gas fireplace service, sometimes called a gas fireplace tune up, keeps small problems small. It includes gas fireplace cleaning of the burner, pilot and logs, a check of the glass gasket, a look at the vent and termination, and a test of the safety controls. Regular gas fireplace maintenance also catches soot and odor problems early.

Inserts, Logs and Propane Units

We handle gas fireplace insert repair and gas insert service on inserts set into older masonry openings, gas log repair on vented and vent-free log sets, and propane fireplace repair where the home runs on tanks. Fireplace insert repair follows the same rule as everything else: parts listed for the unit and the maker's instructions.

A Gas Fireplace Repair Company You Can Call Back

Our gas fireplace repair company is a small family crew, so the same people who fix the fireplace answer the phone if it acts up again. A gas fireplace inspection before the first cool evening is the easiest way to avoid a cold, silent fireplace when you want it.

How a Gas Fireplace Repair Goes

  1. Check the gas and power

    Supply, shut-offs, switches and batteries confirmed first.

  2. Test the flame circuit

    Pilot, thermocouple or thermopile, valve and ignitor.

  3. Replace the failed part

    A part listed for your fireplace model.

  4. Clean and test

    Burner, logs and glass cleaned, the fireplace run and checked.

What the Written Estimate Covers

  1. Testing the pilot, thermocouple or thermopile and valve
  2. Checking the ignitor, controls, blower and remote
  3. Cleaning the burner, logs and glass
  4. Replacement parts listed for your unit and the written price

Book Your Free Stuart Inspection

A short form, a quick call back, and a time that suits you.

(772) 610-6329
  • Inspection first, estimate in writing
  • Upfront pricing, no hidden fees
  • Family owned and operated

Drip, smell, smoke or a stubborn pilot? Describe it in a line and we phone you to schedule the free inspection.

Questions We Answer Often

Why won't my gas fireplace stay lit?

Most often the thermocouple or thermopile is weak or dirty and cannot hold the gas valve open. A dirty pilot, a pilot flame that misses the sensor or a failing valve can cause the same thing. Testing those parts in order finds the cause quickly.

Why does my gas fireplace keep turning off?

Usually a weak thermopile, a dirty pilot or a safety switch is the cause. The switch can trip when the vent or the glass gasket is not sealing; some units also shut off once the room reaches the thermostat setting. We check the controls before replacing any parts.

Who fixes gas fireplaces?

A chimney and fireplace company that works on gas units regularly is the usual call, especially when the vent or termination is involved. Gas line work back toward the meter belongs to a gas contractor or the utility. We tell you plainly which part of the job is ours.

Should a gas fireplace be serviced every year?

Yes, a yearly service is a good habit. The visit cleans the burner and pilot, checks the glass gasket and vent and tests the safety controls. That catches a weak thermocouple or a blocked vent before it leaves you with a fireplace that will not light.

Why does my gas fireplace smell?

A light burning smell on the first fire of the season is dust on the burner and logs, and it fades within an hour. A strong rotten-egg smell is a gas leak: turn the fireplace off, leave the house and call the gas utility from outside. Sooty or sharp odors point to a burner or vent problem that needs service.

Is it normal for the gas fireplace glass to get cloudy?

A light white film is normal on many gas fireplaces. It cleans off with a cleaner made for fireplace glass once the burner is cold. Heavy black soot is not normal and means the flame, the burner or the log set needs adjusting before the next fire.

Proudly American

Family owned in Stuart, with an experienced crew, upfront pricing and a workmanship warranty on the work we do.

Call Now (772) 610-6329

Chimney & Fireplace Brands We Work With

Bring Back an Easy Flame

We test your gas fireplace for free and name the failed part and the fix.