Chimney Tuckpointing in Stuart, FL
Old mortar out, matched mortar in, joints tooled to the original.
- Family owned and run
- Licensed & insured
- Same-day service
- Locally run
Get Your Free Inspection
About thirty seconds
Request received
Thank you. Someone from our family crew will call you to set a time for the free inspection.
Quicker by phone? Call (772) 610-6329
Short answer
Tuckpointing a chimney means grinding worn mortar out of the joints and packing new mortar in its place, tooled to match the original lines. Chimney repointing keeps water out of the stack and holds the bricks tight, and done before the joints fail completely, it saves the brick from more serious damage.
Free Inspection, Then 10% Off the Work
Book your tuckpointing within 72 hours of the free inspection and 10% comes off the work.
How We Handle This Job
-
Experienced crew
Our experienced crew matches mortar color, sand and hardness.
-
Upfront pricing
The faces and courses to repoint, and the price, in writing first.
-
Workmanship warranty
Repointed joints are covered by our workmanship warranty.
Parts and Materials
- Type N or Type S mortar
- Chosen to suit the brick so the joint stays the weaker, sacrificial part.
- Matched sand and pigment
- Brings the new joint close to the color of the old work.
- Joint tools
- Concave, flush or raked profiles matched to the original joints.
Tuckpointing and Repointing
The words are used loosely. Repointing chimney joints means removing failed mortar and replacing it. Tuckpointing chimney work strictly adds a fine contrasting line of mortar on top, a decorative finish seen on some older brickwork. On most chimneys the job people ask for is chimney mortar repair by repointing, and that is what we do unless the original style calls for more.
How the Work Is Done
We cut or grind the old mortar out to a consistent depth, usually about twice the joint's width, without chipping the brick edges. The joints are cleaned and dampened, then filled in layers with mortar mixed to suit the brick. Once the mortar firms up, each joint is tooled to the profile of the surrounding work and the brick faces are brushed clean.
Chimney mortar joint repair done this way bonds properly and lasts. Smearing mortar over the surface does not, and it often traps water behind it.
Matching the Old Mortar
Color, sand and hardness all matter. A repair mortar that is harder than the brick can crack the brick faces over time, and one that does not match in color stands out for years. We test small batches on site and let them dry before committing to the mix for the whole chimney.
Questions We Answer Often
How are worn chimney mortar joints repaired?
First the old mortar is ground out to a steady depth without chipping the brick edges. Then the joints are cleaned, dampened and packed with new mortar in layers. Finally each joint is tooled to match the original profile and the brick is brushed clean.
Which mortar is right for repointing a chimney?
Pick a mix softer than the surrounding brick, usually Type N or a soft Type S. The joint then gives way before the brick does, and matching the color and sand of the old mortar keeps the repointed joints from standing out for years on the stack.
Can loose chimney mortar be fixed without replacing bricks?
Yes, when the bricks are still sound and tight. Repointing replaces only the mortar, and that is enough for most worn joints. If bricks rock, crack or have lost their faces, those units need to be replaced as part of the job.
How long does repointed mortar take to set?
Repointed joints are firm to the touch the next day, and the mortar goes on hardening for several weeks after that. Under strong Florida sun we shade the new joints or mist them lightly to slow the drying. Rain on the first day is the bigger risk, so we plan around the forecast and cover the work if needed.
Chimney & Fireplace Brands We Work With
Heat & Glo 
Heatilator 
Rutland 
Copperfield Chimney Supply 
Olympia Chimney and Venting 
DuraVent
What Shapes the Price
- How many joints need work
- One face, the top courses or the whole stack above the roof.
- Height and roof access
- Steep or tall chimneys need more staging and safety setup.
- Mortar matching
- Old or unusual mortar takes more testing to match.
Book Your Free Stuart Inspection
A short form, a quick call back, and a time that suits you.
- Inspection first, estimate in writing
- Upfront pricing, no hidden fees
- Family owned and operated
Request received
Thank you. Someone from our family crew will call you to set a time for the free inspection.
Repair It or Go Bigger
WhenA few joints are cracked or open
FixSpot repointing of those joints
CheckThe mortar around them is still sound
WhenMost joints are recessed or sandy
FixFull repointing of the affected faces
CheckThe bricks themselves are not loose or flaking
WhenBricks are loose as well as the mortar
FixRelay the courses or a partial rebuild
CheckHow far down the loose masonry runs
Signs This Job Is Due
Mortar is meant to wear before the brick does, and on a Stuart chimney that has seen years of sun and rain it eventually washes out of the joints. Chimney tuckpointing renews it: our crew grinds out the weak mortar, packs in new mortar matched to the brick and tools the joints to look like the original.
- Mortar joints recessed well behind the brick face
- Sand-like mortar that crumbles when scratched
- Gaps you can see daylight or a key through
- Moss or stains concentrated in the joints
Proudly American
Family owned in Stuart, with an experienced crew, upfront pricing and a workmanship warranty on the work we do.
Call Now (772) 610-6329Renew the Mortar Before the Brick Suffers
We mark the joints on your Stuart chimney that need repointing, at no charge.